ROBOCOP license Renewed....

[Chronicle CS]

We've renewed our license for two more years and we were able to get a few new categories.

1/2 and 1-1 Busts are on the way.

We even have the rights to 1-1 full Robocop...

I'd love to do the 1/4 Cain as a bust since that's how he was modeled for the film.


Exciting stuff....

1/4 Cain in the back:

https://scontent-atl3-1.xx.fbcdn.net/hphotos-xta1/v/t1.0-9/11114245_10205389859278644_1106849846231928019_n.jpg?oh=40f75cceddf05e4fe7d01b0a23444ae5&oe=572648F9

1-1:

https://scontent-atl3-1.xx.fbcdn.net/hphotos-xtl1/t31.0-8/12419311_10207350122684004_5670182673340925518_o.jpg

[mjjj1987]

Thats good news Paul,can't wait to see more from this license.
I'm interested in the busts:buttrock:

[LEC]

No 1/3 robocop??

[paris]

1-1 bust will do just fine nice news Paul.
If you are about to produce the 1-1 lifesize I would suggest you to have an international distributor so shipping and taxes is easy for the EU collector.

[paris]

1/3 will come along i think since many hope to have this scale to match cm/ecc.

[generalzodlives]

As much as I'd love to have a 1:1 Robocop, I may not have the room for it. :( Definitely in for a 1:2 bust though.

[BurningRage]

Might go for 1:1 bust.

[PermaGrin]

When you say "1/4 Cain in the back", I assume you are pointing out which will be used for the 1/4 bust.

Cause if you doing a 1/4 full Cain after I just purchased the other Cain along with ED...:slapf:

But I do now need a Robocop to go with the 2.
:smokin:

[El Diablo]

great news! PLEASE at least consider a 1:3 it outright won the poll created and ecc said they wouldn't be doing one and I highly doubt cm will, so you wouldn't be treading on any toes, come on! :)

[El Diablo]

When you say "1/4 Cain in the back", I assume you are pointing out which will be used for the 1/4 bust.

Cause if you doing a 1/4 full Cain after I just purchased the other Cain along with ED...:slapf:

But I do now need a Robocop to go with the 2.
:smokin:

..

We've renewed our license for two more years and we were able to get a few new categories.

1/2 and 1-1 Busts are on the way.

We even have the rights to 1-1 full Robocop...

I'd love to do the 1/4 Cain as a bust since that's how he was modeled for the film.


Exciting stuff....

1/4 Cain in the back:

[CallMe_Snake]

1/1 full Robocop..... whoa.. :jawd:

[PermaGrin]

..

to play your game...

I assume you are pointing out which will be used for the 1/4 bust.

:smokin:

[Phil the sixth]

great news! PLEASE at least consider a 1:3 it outright won the poll created and ecc said they wouldn't be doing one and I highly doubt cm will, so you wouldn't be treading on any toes, come on! :)

Don't get your hopes up high El Diablo...it's pretty clear by now that Paul had to compromise if he wanted to keep using the Toynami factories.
Remember,Paul was very vocal & excited about releasing all sorts of 1/3's (Robocop,Ghostbusters,etc) when he started with Chronicle.From one day to the other you never heard of it again,the excitement was buried...Chronicle produces all kinds of scales now...1/4, 1/2, 1/1,even 1/6 except 1/3 scale! ...Toynami's CEO only granted Wang/ECC to produce 1/3's in his factories.That's the way it is,sadly...

[Armored_Berserk]

I would love a Robocop life size bust, since Fred Barton's was a mess...

[The SHOGUN]

I would love a Robocop life size bust, since Fred Barton's was a mess...

it certainly was hit or miss. A mess for some a Gem for others. I'm in the gem segment as my Fred Barton bust is arguably my favorite piece in my collection.

[CAIN MKII]

Terrific.
More Robocop stuff and above all, Cain 1/4 bust is very first in my priority list....no surprise :)
And a Robocop statue in scale with ED and Cain if possible please :)
The Robocop 2 failed prototypes would be so hot too.

Thank you very much Chronicle.

Man what Am I gonna do with my PCS Robocop statue still to come? lol

[El Diablo]

to play your game...



:smokin:

Wasn't playing a game just pointing out he said it was going to be a bust, if you already knew that why ask about a full size 1:4 if he never even mentioned it?

[El Diablo]

Don't get your hopes up high El Diablo...it's pretty clear by now that Paul had to compromise if he wanted to keep using the Toynami factories.
Remember,Paul was very vocal & excited about releasing all sorts of 1/3's (Robocop,Ghostbusters,etc) when he started with Chronicle.From one day to the other you never heard of it again,the excitement was buried...Chronicle produces all kinds of scales now...1/4, 1/2, 1/1,even 1/6 except 1/3 scale! ...Toynami's CEO only granted Wang/ECC to produce 1/3's in his factories.That's the way it is,sadly...

Yeah I know but can't do any harm asking, I just thought as Ecc and cm will doubtful touch robocop there might be a chance of chronicle stepping in. I hate to see the 1:3 robocop dream die :)

[PermaGrin]

clarification
to be sure
never no with these companies
maybe I want/rather a 1/4 :p

[CAIN MKII]

When you say "1/4 Cain in the back", I assume you are pointing out which will be used for the 1/4 bust.

Cause if you doing a 1/4 full Cain after I just purchased the other Cain along with ED...:slapf:

But I do now need a Robocop to go with the 2.
:smokin:

THIS is the 1/4 Cain Paul's talking about, the movie prop used for closed up of the split open face plate and pop up LCD screen

http://imageshack.us/a/img923/3336/yhub7w.jpg

http://imageshack.us/a/img923/1977/gSB7qW.jpg

http://imageshack.us/a/img922/3397/xUcy7m.jpg

[kkchan]

Robocop
1/1 bust
1/3 full statue

ED209
1/4 full scale

Above is what I am looking for. 1/1 full statue I hope I can get it, if the price is affordable for me

[candyrocket786]

I would love a Robocop life size bust, since Fred Barton's was a mess...

I second that. I own one of them.

I want:
1-1 Bust
1-1 Battle Damaged Bust w/Weller reveal. :buttrock:

[bonedaddy77]

1:1 bust please

[thx217]

Oooh yeah!!

[Chronicle CS]

The 1:4 Cain would be similar to how we are producing the Arnold bust, it will be cut off and not a full upper body, it's juts to massive at that scale.

Once we reveal the 1/2 Endoskeleton buts it will be close to how we will produce Robocop and Cain for our bust line.

[Chronicle CS]

1/3 has always been reserved for Cinemaquette and we'd love to do a Cinemaquette with Toynami based upon one of our licenses and it will happen one day.

The old expression don't poop where you eat comes to mind. It's not that I don't want to do 1/3, we do, but we have a partnership with Toynami and one that I will respect.

I've known George for twenty years and he's produced the best quality possible for us, as good as anything going or better in my opinion, so unless he wants to partner on a 1/3 with us, it's his domain for now.

We are expanding our 1:2 busts and I'd like to make that a scale everyone will want to collect. I already see other companies following our lead.

Patience guys, it will take a little while to develop the new products.

Ideas are always welcome so fire away....

My goal is to involve Rob Bottin in some way if possible...

Paul

[CAIN MKII]

The 1:4 Cain would be similar to how we are producing the Arnold bust, it will be cut off and not a full upper body, it's juts to massive at that scale.

:buttrock:
Sounds awesome :)
I understand how massive a Cain full upper body would be but cut off worried me a little :(

Rob Bottin in the loop?
How best can it be?
I'm so excited by all these announcements.
Thank you Chronicle collectibles for producing the best.

[kkchan]

1/3 has always been reserved for Cinemaquette and we'd love to do a Cinemaquette with Toynami based upon one of our licenses and it will happen one day

What about 1/2 Robocop? I hope can get one so I can pair with my 1/2 Iron man, upcoming batman and etc

Beside, hoping 1/4 ED209 as well

[LEC]

1:4 cut off Cain is not what was used for filming so we wouldn't get a prop replica like with the current ED-209 and Cain...

[ottorino]

1/3 has always been reserved for Cinemaquette and we'd love to do a Cinemaquette with Toynami based upon one of our licenses and it will happen one day.

The old expression don't poop where you eat comes to mind. It's not that I don't want to do 1/3, we do, but we have a partnership with Toynami and one that I will respect.

I've known George for twenty years and he's produced the best quality possible for us, as good as anything going or better in my opinion, so unless he wants to partner on a 1/3 with us, it's his domain for now.

We are expanding our 1:2 busts and I'd like to make that a scale everyone will want to collect. I already see other companies following our lead.

Patience guys, it will take a little while to develop the new products.

Ideas are always welcome so fire away....

My goal is to involve Rob Bottin in some way if possible...

Paul

Has the 1/3 scale maquette been discussed with George ?

[CAIN MKII]

1:4 cut off Cain is not what was used for filming so we wouldn't get a prop replica like with the current ED-209 and Cain...

I guess it will be more of a bust than a replica But fear not, Paul will release an epic piece :)

[El Diablo]

1/3 has always been reserved for Cinemaquette and we'd love to do a Cinemaquette with Toynami based upon one of our licenses and it will happen one day.

The old expression don't poop where you eat comes to mind. It's not that I don't want to do 1/3, we do, but we have a partnership with Toynami and one that I will respect.

I've known George for twenty years and he's produced the best quality possible for us, as good as anything going or better in my opinion, so unless he wants to partner on a 1/3 with us, it's his domain for now.

We are expanding our 1:2 busts and I'd like to make that a scale everyone will want to collect. I already see other companies following our lead.

Patience guys, it will take a little while to develop the new products.

Ideas are always welcome so fire away....

My goal is to involve Rob Bottin in some way if possible...

Paul

That's fair enough, at least it sounds like there's a chance a 1:3 robocop might happen one day :praying:

[qz33]

1:1 busts have my full attention.

[kevin2323]

legit 1:1 bust is going to be epic

[CAIN MKII]

Hi Paul,
Is it possible to keep the spliting face mecanism for Cain 1/4 Bust?
I would love to mount a mini LCD screen inside showing Cain digital face sequence :)

[Chronicle CS]

I think we would do an interchangeable head....

[CAIN MKII]

AWESOME!!!
About the cut off thing.
When you said just like the 1/2 Arnold/terminator bust, does it mean the front will be complete and the back removed for the base?

[chokeman]

We've renewed our license for two more years and we were able to get a few new categories.

1/2 and 1-1 Busts are on the way.

We even have the rights to 1-1 full Robocop...

I'd love to do the 1/4 Cain as a bust since that's how he was modeled for the film.


Exciting stuff....

1/4 Cain in the back:

https://scontent-atl3-1.xx.fbcdn.net/hphotos-xta1/v/t1.0-9/11114245_10205389859278644_1106849846231928019_n.jpg?oh=40f75cceddf05e4fe7d01b0a23444ae5&oe=572648F9

1-1:

https://scontent-atl3-1.xx.fbcdn.net/hphotos-xtl1/t31.0-8/12419311_10207350122684004_5670182673340925518_o.jpg


I have the Ed on order and think a 1/2 bust of that Robo would be nice to go along with it :)

[jimmylace]

I'd be in for a Robocop 2 1/2 bust, as long as it has all the bluey-purpley goodness...

[shiveringmelody]

Any chance of a battle damage Robocop from the '87 film? Whether it's 1/2 bust or life size bust or 1/3 statue, I have dreamt of a 1987 battle damage Robocop.

[Remember Me?]

I am hoping for 1:1 scale bust Robocop with removeable helmet.

[ZenLogikos]

I am hoping for 1:1 scale bust Robocop with removeable helmet.

Clever editing in the film obscured the fact that when the helmet was removed, the chin guard disappeared. Unless that is removable as well, I'd say that's unlikely. Of course, it could be done, but it would look weird if it stayed on. I'd guess it will be sculpted to the face.

[candyrocket786]

Clever editing in the film obscured the fact that when the helmet was removed, the chin guard disappeared. Unless that is removable as well, I'd say that's unlikely. Of course, it could be done, but it would look weird if it stayed on. I'd guess it will be sculpted to the face.

That always bothered me about the film. Like the Raccoon eyes thing in Batman Returns.

[CAIN MKII]

Me: "Hi Paul,
Is it possible to keep the spliting face mecanism for Cain 1/4 Bust?
I would love to mount a mini LCD screen inside showing Cain digital face sequence "

Paul:
"I think we would do an interchangeable head.
Maybe we can put the screen in with animation..."

How's that?
Fraking cool isn't it?

[clutch]

Clever editing in the film obscured the fact that when the helmet was removed, the chin guard disappeared. Unless that is removable as well, I'd say that's unlikely. Of course, it could be done, but it would look weird if it stayed on. I'd guess it will be sculpted to the face.

All these years and I never noticed that!!!!!!!!!!!!!

[Viper245]

Great news! I am down for a 1/2 scale Robocop bust.

[ZenLogikos]

That always bothered me about the film. Like the Raccoon eyes thing in Batman Returns.

The Batman Returns thing always bothered me; the RoboCop one, not so much. Didn't they do it right in a Nolan Batman? I seem to recall some superhero wiping make-up off his eyes after removing his mask... :thinking:

All these years and I never noticed that!!!!!!!!!!!!!

"You're welcome!" or, if it bothers you, "Sorry!" ;)

[candyrocket786]

The Batman Returns thing always bothered me; the RoboCop one, not so much. Didn't they do it right in a Nolan Batman? I seem to recall some superhero wiping make-up off his eyes after removing his mask... :thinking:


That was in Kick-Ass. You see Nic Cage put it on for his Big Daddy costume. Then you see Red Mist take off his mask and keep the raccoon eyes for the remainder of the film.

[ZenLogikos]

That was in Kick-Ass. You see Nic Cage put it on for his Big Daddy costume. Then you see Red Mist take off his mask and keep the raccoon eyes for the remainder of the film.

Hmm, there's another one then, because I've seen someone rub stuff off their eyes, but I haven't seen Kick-Ass.

[ZenLogikos]

HOLD UP! I think I'm thinking of Birdman! Do I remember correctly? If so, a clever nod indeed.

[The SHOGUN]

https://scontent-atl3-1.xx.fbcdn.net/hphotos-xta1/v/t1.0-9/11114245_10205389859278644_1106849846231928019_n.jpg?oh=40f75cceddf05e4fe7d01b0a23444ae5&oe=572648F9



I remember when I first saw this picture on the internet years ago it was a dream of mine to own an official Tippett ED-209 and CAIN replica. Thank you Chronicle for making that possible.

[Planeswalker]

I would love a Robocop life size bust, since Fred Barton's was a mess...

:iagree:

[El Diablo]

That always bothered me about the film. Like the Raccoon eyes thing in Batman Returns.

nah he uses bat paint, disappears as soon as he takes the mask off ;)

[The SHOGUN]

nah he uses bat paint, disappears as soon as he takes the mask off ;)

Duh everyone knows that. Common knowledge.
:penguin:

[CAIN MKII]

No bat paint, bat make up and eyeliner

[daz1999]

So glad I didn't go the Fred Barton route, I was close a few times, especially after seeing what some people went through with that guy.
So I couldn't be happier right now :)

[The SHOGUN]

So glad I didn't go the Fred Barton route, I was close a few times, especially after seeing what some people went through with that guy.
So I couldn't be happier right now :)

Again, you're right it certainly was a gamble when it shouldn't have been. For may collectors it was an EPIC FAILURE.

But the early pieces ones that arrived safely that we're ordered direct through Fred (not Sideshow) were masterpieces.

I am happy for those that will have another shot at owning a licensed 1:1 RoboCop bust. As a happy owner of the First run Barton bust, I am not interested as there is minimal if any room for improvement.

[El Diablo]

If chronicle could cast a hero suit (if any still exist) it would be an improvement, well depending on how much you value casts from original props.

[candyrocket786]

Again, you're right it certainly was a gamble when it shouldn't have been. For may collectors it was an EPIC FAILURE.

But the early pieces ones that arrived safely that we're ordered direct through Fred (not Sideshow) were masterpieces.

I am happy for those that will have another shot at owning a licensed 1:1 RoboCop bust. As a happy owner of the First run Barton bust, I am not interested as there is minimal if any room for improvement.


The hell they were...

This mine ( which I still have). It arrived with no damage but his shop secured the bust incorrectly which gave it a weird lean. Dumbass blamed FedEx for that mishap which was complete b/s. Ended up fixing it myself.

http://img.photobucket.com/albums/v298/DVDVampire/Robocop_Bust/IMG_0647.jpg

....then later the visor started peeling off.
http://img.photobucket.com/albums/v298/DVDVampire/Robocop_Bust/Robopeel.jpg



I'm convinced Chronicle could out do this one easily.

[The SHOGUN]

Dude you bust looks fantastic. Mine does not have a lean and mine does not have the visor problem but if it did One Dab of super glue would fix the visor problem. Total fix time about 15 seconds.

I had to do some minor modification to my Chronicle ED-209 and Chronicle Cain, but you don't hear me down grading the fantastic pieces they are. Again Candy, your bust is really nice looking you are being wayyyyyyyyyy too hard on it.

[daz1999]

Again, you're right it certainly was a gamble when it shouldn't have been. For may collectors it was an EPIC FAILURE.

But the early pieces ones that arrived safely that we're ordered direct through Fred (not Sideshow) were masterpieces.

I am happy for those that will have another shot at owning a licensed 1:1 RoboCop bust. As a happy owner of the First run Barton bust, I am not interested as there is minimal if any room for improvement.

Oh don't get me wrong,the ones that turned up with little or no issues looked really good,and even after seeing the problems a lot of folk had i was still seriously tempted, if you got a good one then its a great piece, but for the money including shipping and tax (I'm in the UK) i just couldn't take the gamble.

If Chronicles record so far is anything to go by i'll be ordering theres 100%

[Planeswalker]

The name Fred Barton will forever be known in the collectible community as "The guy who screwed up Robocop".

I'd say that's most def an EPIC fail. :dork:

[CAIN MKII]

http://img.photobucket.com/albums/v298/DVDVampire/Robocop_Bust/Robopeel.jpg

Have you notice the shoulders screws?
They are not on the other busts.

[Stark Industry]

http://ww1.sinaimg.cn/large/006exe8Cgw1f0zzyiabupj30om112wko.jpg
http://ww1.sinaimg.cn/large/006exe8Cgw1f0zzyf3n9lj30qo0zk7aw.jpg
http://ww2.sinaimg.cn/large/006exe8Cgw1f0zzyeguzej31f02iohdt.jpg
http://ww1.sinaimg.cn/large/006exe8Cgw1f0zzygh5c0j31f02io7wh.jpg
http://ww1.sinaimg.cn/large/006exe8Cgw1f0zzycztcyj31120kudj3.jpg
http://ww1.sinaimg.cn/large/006exe8Cgw1f0zzyjdkp6j32io1f07wh.jpg
http://ww1.sinaimg.cn/large/006exe8Cgw1f0zzyhlotnj32io1w0b29.jpg
http://ww4.sinaimg.cn/large/006exe8Cgw1f0zzycac6dj32io1w0x6p.jpg

[bonedaddy77]

I had the first release of the bust direct from Fred Barton and it looked really good but was so damn hollow and didn't like the way the base was screwed in. I ended up selling for a nice profit. If Chronicle does a bust I'd definitely consider getting it

[Chronicle CS]

Hey guys I don't want this to become a bash thread on another company.

1-1 will take some time, maybe endo of the year kind of time. I want to make a full size 1-1 and eventually a bust.

We are currently working on a 1/2 bust and are looking for any reference you might have. While we have an original suit, it's from Robocop 2 and we are actively seeking Robocop 1 suit and reference.

Paul

[jfyahui]

Will you do. 1/6 robocop? Will go nicely with Ed and Cain...

[LEC]

I'm in on a 1/6 Robocop.

[Chronicle CS]

I hear Hot Toys makes great 1/6 Robocops....

[jinkazama]

Hi, Paul.As you've renewed the Robocop license, is there any chance you'll make another version of Cain?[perhaps with the lights, or the square head with human Cain's digitalized face on it]Also, what about making mini canasters of Nuke, to fit in the already released Cain's open hand?

[jfyahui]

I hear Hot Toys makes great 1/6 Robocops....
Lol...True,and I have him along with Ed,but I'm still buying your Ed and Cain,that's the real deal,i don't really want more hot toys stuff,but I do want proper movie replicas,..from the robocop license,i understand if maybe your not allowed at that scale,is that the issue?

[LEC]

Same here. I have the hot toys Robocop and ED-209 but don't want anything hot toys anymore. I have chronicle ED-209 and Cain but need 1/6 Robocop.
Also 1/3 Robocop got my vote.

[Chronicle CS]

We're working on some larger Cain items and 1-1 Robocop items.

[jinkazama]

We're working on some larger Cain items and 1-1 Robocop items.
Any hints as to what they are?

[CAIN MKII]

Cain1/4 bust and Robocop 1/1 statue :)

[Remember Me?]

We're working on some larger Cain items and 1-1 Robocop items.

1:1 Robocop bust or 1:1 Robocop's gun...I hope.

[jfyahui]

Cain and robocop bust would also be great!;)

[FastballSpecial]

I need the man himself, Alex Murphy!

[Chronicle CS]

1:2 Bust will be on display at Comic Con.

[thx217]

1:2 Bust will be on display at Comic Con.

http://i66.photobucket.com/albums/h279/thx217/thx217126/9d62fd4fa48c4072_25_zpscbaqrxgx.gif~original (http://s66.photobucket.com/user/thx217/media/thx217126/9d62fd4fa48c4072_25_zpscbaqrxgx.gif.html)

Sucks that I won't be able to make it this year to see the proto in person....:waah:

[jaxon]

That does Suck! I always look forward to you're pictures.

[The SHOGUN]

1:2 Bust will be on display at Comic Con.

That's fantastic!

[thx217]

That does Suck! I always look forward to you're pictures.

Thanks, Jax. There will be plenty of great pics of it for sure.

[CAIN MKII]

Its Robocop party again, let's have some extra baby food :)

[jfyahui]

Ok, how about you guys do a proper 1/4 or 1/3 robocop, maybe do a battle damaged exclusive??? You would have a huge sell out, .. Sideshows was a dud, and PCs looks like they messed up the face and visor, I think because you have the licence , go epic and do something amazing ..so far only enterbay has come close at 1/4 but it's a toy.. So can we expect something in the future from cc??

[Viper245]

I second that request but make it 1:4 scale. It would be much easier to display and easier on the wallet. It would also make a nice companion piece to the 1/2 scale Robocop bust Chronicle has planned.

[jimmylace]

I second that request but make it 1:4 scale. It would be much easier to display and easier on the wallet. It would also make a nice companion piece to the 1/2 scale Robocop bust Chronicle has planned.

Yup. I agree on this one; should be an easier job than the Endo

[CAIN MKII]

Give me CAIN Helmet replica and 1/4 bust anytime :)

[El Diablo]

:buttrock::buttrock::buttrock:1:3 ROBOCOP !!!!!:buttrock::buttrock::buttrock:

[jfyahui]

I second that request but make it 1:4 scale. It would be much easier to display and easier on the wallet. It would also make a nice companion piece to the 1/2 scale Robocop bust Chronicle has planned.

Agree,1/4 would be best option,inthink cc need to step up now with the license,and I belive they can do the ultimate robocop 1/4,cc make it!:praying:

[Enforcer]

Yup also requesting 1/4 yet again via Toynami thank you very much. PCS did fine for it's target base but it's not art....far from it.

PCS doesn't have the license anymore although they claim that one phone call can change that if it's needed. The product has already been sold out and CC Robo production is not going to affect PCS by time they reveal a 1/4 months or longer from now. I like to think now is the time to start producing a 1/4 Robo so we can get the reveal within 6 months or so...8-9 months for pre-order, and we'll have our definitive 1/4 Robo in hand by the end of 2017 :buttrock:

I want art, not toys :thumbs2:

Not that there's anything wrong with the other robo ideas first. It's just that I'm biased towards 1/4. I'm patient and will wait for it....

[The SHOGUN]

Yup also requesting 1/4 yet again via Toynami thank you very much. PCS did fine for it's target base but it's not art....far from it.

PCS doesn't have the license anymore although they claim that one phone call can change that if it's needed. The product has already been sold out and CC Robo production is not going to affect PCS by time they reveal a 1/4 months or longer from now. I like to think now is the time to start producing a 1/4 Robo so we can get the reveal within 6 months or so...8-9 months for pre-order, and we'll have our definitive 1/4 Robo in hand by the end of 2017 :buttrock:

I want art, not toys :thumbs2:

Not that there's anything wrong with the other robo ideas first. It's just that I'm biased towards 1/4. I'm patient and will wait for it....

Idk maybe I'm biased because I have the PCS RoboCop on order, but I'm reading these requests for a "new and improved" RoboCop and im laughing my ass off.

The damn thing isn't even out yet

:laugh:

[KELPIE]

Idk maybe I'm biased because I have the PCS RoboCop on order, but I'm reading these requests for a "new and improved" RoboCop and im laughing my ass off.

The damn thing isn't even out yet

:laugh:

Similar to people in the PCS threads asking for a Conan on throne... :sly2:

[Enforcer]

Idk maybe I'm biased because I have the PCS RoboCop on order, but I'm reading these requests for a "new and improved" RoboCop and im laughing my ass off.

The damn thing isn't even out yet

:laugh:
I don't find it funny one bit. I've been thinking about it since I first saw it because to me it was the ONLY chance I would ever get a 1/4 Robo with how Paul was acting towards the idea of Robocop products last year, and so far two sets of pictures and some reviewing and it's a mess. No sir, I find nothing funny about it. But if you happen to obtain a flawless edition I'd be glad to hear about it so I can reconsider my opinion and try to pick one up somewhere to try my luck.

As I said in PCS's forums, I did not get the chance to PO an EX edition. Regular editions are a ----ty practice(and were never offered for PO from what I understand). It's an inferior offering for no good reason. But they exist and it changes everything for me in regards to Robo. I can't just return it for a refund to 3rd party sites if it blows. I might have been happy with a flawed EX edition, but I won't be with a regular, assuming I ever get a notice about it being available to pay off my PO from where I PO'd it. I'm still around 20/80 in favor of cancelling. I'll need to see some positive feedback mighty quick for me to pay it off...

If PCS's factory guys manage to deliver the majority of their work as flawless or near flawless then my request is null and void for all I care. I'll pay a couple hundred more on eBay if I must for PCS's offering and live with any flaws. But I ain't holding my breathe for a $400 Robo 1/4 grail from PCS after two heart breaking sets of images. Flaws are to be expected, but when there are so many on just one piece...

I still give them extreme kudos for achieving the tint finishes. Maybe I just haven't watched Robocop in awhile but it looks 100% accurate to me via armored's pics. To be fair, it's probably worth the $400 dollars. But it's never going to compete with a 1/4 CC production if they ever choose to do it. Different companies, different missions...

[jfyahui]

I have the robo pcs on pre order,but will cancel most probably 99%,
I know it's not out ,but the flaws are very obvious,the body is great,the head sculpt is very poor,the helmet is all wrong,should be close to his lips,visor is poorly painted matte,not shiny( this is no Conan or akuma!which I have both on order)you can tell robo did not receive the same TLC as the other two,and that's a shame,and I cannot overlook that,I like the charector too much,I rather wait for cc to give it a shot,but I hope I'm wrong and the pcs piece is great!;)

[Collectorcol]

1:2 Bust will be on display at Comic Con.

Did he make it to SDCC?

[thx217]

Robo didn't make it to the show. :(

[FastballSpecial]

So will Chronicle ever make a 1/4 Robocop since PCS still hasn't shipped theirs ?

[candyrocket786]

I'd rather have a 1/3 at this point.

[FastballSpecial]

I'd rather have a 1/3 at this point.

My eyes say yes but my wallet says no :smokin:

[jfyahui]

I'm surprised after how well Cain and Ed came out,why no robocop statue ,for a robocop license ...if we do get one,it will be 1/4 for sure...

[jfyahui]

Hi, Paul.As you've renewed the Robocop license, is there any chance you'll make another version of Cain?[perhaps with the lights, or the square head with human Cain's digitalized face on it]Also, what about making mini canasters of Nuke, to fit in the already released Cain's open hand?

Agree,I would like that also,good idea...

[candyrocket786]

I want a 1/3 Scale statue for Robo. There have already been three attempts at a 1/4 scale (Sideshow, Enterbay, and PCS).

[BurningRage]

I believe PCS said that a 1/3 would've cost $2500 to get the paint right.

[Enforcer]

I want a 1/3 Scale statue for Robo. There have already been three attempts at a 1/4 scale (Sideshow, Enterbay, and PCS).I rather have a 1/4 CC piece produced by Toynami to finally nab my 1/4 Robo grail but ok, that's a fair point to make. I might consider buying a 1/3 or bigger Robo, but I sure would like the 1/4 to go along with the rest of my CC 1/4 museum pieces. My CC 1/4 collection will always be less than it could have been without the Robo to complete the set.

I do now know and accept that a 1/6 Robo is a total waste of time and money and CC should avoid it like the plague.

[jfyahui]

I rather have a 1/4 CC piece produced by Toynami to finally nab my 1/4 Robo grail but ok, that's a fair point to make. I might consider buying a 1/3 or bigger Robo, but I sure would like the 1/4 to go along with the rest of my CC 1/4 museum pieces. My CC 1/4 collection will always be less than it could have been without the Robo to complete the set.

I do now know and accept that a 1/6 Robo is a total waste of time and money and CC should avoid it like the plague.

1/6 waste of time? Why?would match Cain and ed,..
I would prefer 1/4 always,but will take whatever cc gives us,( 1/6,1/3,or1/4)
Price point for a 1/3 is not a big deal,we have payment plan options to help!;)

[Fu_Manchu]

1/3 Robo all the way. If the sculpt equals the bust shown, that would make the ultimate Robocop piece.

[PermaGrin]

bust bust bust :D

[Chronicle CS]

1-1 Cain head is the last thing we will be producing from Robocop.

The 1/2 Bust will be capped at around 300 units.

[CAIN MKII]

1-1 Cain head will be epic and I will PO mine asap.
But I'm sad to read it will be the last piece to be produce from the Robocop line.
I was especting a replica of the Cain 1/4 scale bust with a split open face :(
And the 2 Robocop 2 failed prototypes

[candyrocket786]

So much for supporting the Robo line. Its been fun.

[jfyahui]

Let's see,I've ordered the bust,and I'm paying on flex Cain and edd,
From pcs I bought 2 robocops,an exclusive and refgular,( from pcs)they came out great....but my dream and I'm sure of many more fans...would be a true Robocop statue from chronicle...