Harley Quinn - Super Powers Collection 1:6 Scale Maquette

[jeremydmc]

I was all set to pre-order this but I am very concerned about the future leaning issues as well. It looks great!

[JWP]

Hey Guys sorry to get to you all late but it took awhile for my profile to be approved. With that said I can answer a few of your ?s but cant go into complete detail of what this line is up too.

#1- As for scale she is sixth scale.

#2 Regular release for all vendors is the traditional head with traditional collar, and the popgun hand. You can get that version from, sideshow, big bad toy store, entertainment earth, etc.... Tweeter heads version is the exclusive because it comes with the goggle head, scarf collar, joker hand, traditional head with traditional collar, and pop gun hand. So by buying it from Tweeter Head you get all the parts to mix and match how you want to display it.

#3-I see there is alot of concern about the smoke trail not holding her weight. Keep in mind that the pictures are a prototype and not final product. We have already revised the tooling master that's going to the factory for production. It has been beefed up to make sure there are no weak points to alleviate any bending and it also will not interfere with the look of the piece. So what this prototype looks like will not differ much at all just the smoke trail is a little thicker and bulkier near the bottom. Also we have confirmed with our factory that the smoke trail will be produced in a clear material that is very rigid and will not warp or break. So to answer that ? This piece went through alot of development and this issue was addressed knowing that this would be a major concern for the buyer and collector. It has been taken care of and I hope you guy enjoy her if you decide to purchase her.

# 4- This line will be covering a wide variety of diverse characters from the DC universe.

Thank you and I hope this helps out.

Jason Wires

[omigeo]

Thank you JWP

[Hellboy]

Thanks for taking the time to post that information Jason and welcome to the forum.

Based on your response I did have a follow up question if you don't mind? Do you guys have a timetable when you will be revealing more about this line? I undeserstand with licensing agreements this can be a tricky process. Just looking for more specifics like what the focus is, how broad a range of characters we're talking about (A listers Vs C listers etc.) and if you guys have long term plans to support the line if it proves successful.

Thanks again for your time and contribution.

[JWP]

Not a problem it was my pleasure.

As for your ? Tweeter Head will have a big reveal at San Diego Comic con and the Harley will be on display with the new jet stream. So anyone that purchases her can actually see her. Also there will be updated pictures soon so everyone can see the final look of the revised piece regardless if they make it to the show or not.

The line it's self will vary on all characters and from A to C. As for ratio between I really cant say, but there are some B,C, characters in development. Tweeter Heads Goal is to keep this line alive for a very long time and make as many characters from the DC Universe as possible.

Everyone involved has a passion for this line and everyone is super excited.

Thanks,

Jason Wires

[jeremydmc]

Thank you very much for the information JWP. I'm all set to pre-order now!

[nearmint]

Hi JWP, what's the edition size on the exclusive?

[JWP]

We appreciate the support and thank you very much!

[grphyx1]

Hey Jason, Thanks for the information. I had actually mentioned to Debbie that maybe tweeterhead could set up a "ask tweeterhead" thread since you guys get a lot of love here.

Originally Posted by JWP

Hey Guys sorry to get to you all late but it took awhile for my profile to be approved. With that said I can answer a few of your ?s but cant go into complete detail of what this line is up too.

#1- As for scale she is sixth scale.

#2 Regular release for all vendors is the traditional head with traditional collar, and the popgun hand. You can get that version from, sideshow, big bad toy store, entertainment earth, etc.... Tweeter heads version is the exclusive because it comes with the goggle head, scarf collar, joker hand, traditional head with traditional collar, and pop gun hand. So by buying it from Tweeter Head you get all the parts to mix and match how you want to display it.

#3-I see there is alot of concern about the smoke trail not holding her weight. Keep in mind that the pictures are a prototype and not final product. We have already revised the tooling master that's going to the factory for production. It has been beefed up to make sure there are no weak points to alleviate any bending and it also will not interfere with the look of the piece. So what this prototype looks like will not differ much at all just the smoke trail is a little thicker and bulkier near the bottom. Also we have confirmed with our factory that the smoke trail will be produced in a clear material that is very rigid and will not warp or break. So to answer that ? This piece went through alot of development and this issue was addressed knowing that this would be a major concern for the buyer and collector. It has been taken care of and I hope you guy enjoy her if you decide to purchase her.

# 4- This line will be covering a wide variety of diverse characters from the DC universe.

Thank you and I hope this helps out.

Jason Wires

[Hellboy]

Originally Posted by grphyx1

Hey Jason, Thanks for the information. I had actually mentioned to Debbie that maybe tweeterhead could set up a "ask tweeterhead" thread since you guys get a lot of love here.

FWIW I have created our own official Ask Tweeterhead thread which will remain sticky at the top of this section.