|
|
07-07-2019, 11:48 AM
|
#1681
|
42.7 percent of all statistics are made up on the spot.
Join Date: Nov 2018
Posts: 173
|
It’s very likely P1 has different variations of the cape.. I’ve been seeing a lot of difference here and there across pics
|
|
|
07-10-2019, 09:00 AM
|
#1682
|
42.7 percent of all statistics are made up on the spot.
Join Date: Nov 2018
Posts: 173
|
just got word from p1.. not that it matters now, but for those who are shelf measuring meticulous I know there were a bunch of reviews out there too that measured varying heights, so its good to see P1 confirm. Too late for me, I had to redo my shelves for him anyhoo...
Thank you for contacting us.
We are sincerely sorry for the late reply.
We have confirmed the size of Hush Batman Statue.
The right height is 70 cm.
It seems like the size on our website was the size of the previous version,
before the statue was actually released.
We are sincerely sorry for the inconvenience it may have caused you.
Please do not hesitate to contact us If you have any questions.
Kind regards,
Prime 1 Studio
|
|
|
07-12-2019, 03:31 PM
|
#1683
|
42.7 percent of all statistics are made up on the spot.
Join Date: Mar 2018
Posts: 190
|
I bought the regular version but recently I had the opportunity to get the EX in my country without customs charges and I bought it too.
Well, today I opened the statue and it is almost perfect but there are some white marks in two parts of the capes (see photos). It is subtle but it is there so I don't know if somebody knows how I can solve it. I wouldn't want to ask for a replacement just for a scratches.
After assembling the cape (done well) you can see that the cape is far from the gargoyle just like my regular version was. And I say "was" because right now the cape of the regular is touching the gargoyle. I show you two photos so you can see the difference.
I think all capes start far from the gargoyle and little by little get the right position which is touching the base and being supported by it.
Nothing else, I hope someone here can help me. I am very happy with my smirking bats. The base has terrible painting but the rest is very solid.
It is disappointing that my Noel Bats does not have any minor damage or detail done badly. The painting, sculpt, base, everything is just perfect. The hush line should have the same kind of perfection but looking at this bad boy and supes...I wouldn't say that. 8,5 out of 10? sure!! More?... I don't think so.
|
|
|
07-13-2019, 11:24 AM
|
#1684
|
I took an IQ test and the results were negative.
Join Date: Oct 2007
Posts: 64
|
Quote:
Originally Posted by letsroy
I bought the regular version but recently I had the opportunity to get the EX in my country without customs charges and I bought it too.
Well, today I opened the statue and it is almost perfect but there are some white marks in two parts of the capes (see photos). It is subtle but it is there so I don't know if somebody knows how I can solve it. I wouldn't want to ask for a replacement just for a scratches.
After assembling the cape (done well) you can see that the cape is far from the gargoyle just like my regular version was. And I say "was" because right now the cape of the regular is touching the gargoyle. I show you two photos so you can see the difference.
I think all capes start far from the gargoyle and little by little get the right position which is touching the base and being supported by it.
Nothing else, I hope someone here can help me. I am very happy with my smirking bats. The base has terrible painting but the rest is very solid.
It is disappointing that my Noel Bats does not have any minor damage or detail done badly. The painting, sculpt, base, everything is just perfect. The hush line should have the same kind of perfection but looking at this bad boy and supes...I wouldn't say that. 8,5 out of 10? sure!! More?... I don't think so.
|
I think as long as the batman body still in the same position and no leaning issue what so ever,as long as the cape only which change position it still okay and about the scratch i have the same issue and i tried to clean in using hot water and it clean again
|
|
|
07-13-2019, 11:33 AM
|
#1685
|
42.7 percent of all statistics are made up on the spot.
Join Date: Mar 2018
Posts: 190
|
Quote:
Originally Posted by aditya
I think as long as the batman body still in the same position and no leaning issue what so ever,as long as the cape only which change position it still okay and about the scratch i have the same issue and i tried to clean in using hot water and it clean again
|
And did you solve it?
|
|
|
07-13-2019, 11:42 AM
|
#1686
|
I took an IQ test and the results were negative.
Join Date: Oct 2007
Posts: 64
|
Quote:
Originally Posted by letsroy
And did you solve it?
|
80% i solve it because if i see your photos is like mine ,at first i though its a scratch
|
|
|
07-14-2019, 07:23 AM
|
#1687
|
Blue Falcon
Join Date: Mar 2017
Location: Frederick, Maryland
Posts: 555
|
I remember Kelvin Loke on the FB group mentioned once that the cape is supported by the base. I didn't think much of the comment at the time but after seeing a lot of the pictures on here now, it makes sense.
|
|
|
07-14-2019, 09:58 AM
|
#1688
|
42.7 percent of all statistics are made up on the spot.
Join Date: Mar 2018
Posts: 190
|
Quote:
Originally Posted by aditya
80% i solve it because if i see your photos is like mine ,at first i though its a scratch
|
Thanks!
I tried but the problem endures.
I will wait a couple of weeks because sometimes these defects worry you just at the beginning. If my concerns remain then I will search for another solution.
|
|
|
07-18-2019, 11:52 AM
|
#1689
|
I took an IQ test and the results were negative.
Join Date: Oct 2007
Posts: 64
|
Quote:
Originally Posted by letsroy
Thanks!
I tried but the problem endures.
I will wait a couple of weeks because sometimes these defects worry you just at the beginning. If my concerns remain then I will search for another solution.
|
If it still intact and still bother you it is better you contact p1 as soon as possible, what concerns me the most is the leaning issue,right now it still the same but we dont know how long it will take
|
|
|
07-19-2019, 12:12 PM
|
#1690
|
Shadowhawk
Join Date: Aug 2011
Location: Wisconsin
Posts: 906
|
Hoping for a replacement part from Sideshow. Have Superman on order too and really wanted to pair these guys.
|
|
|
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
|
All times are GMT -4. The time now is 01:29 AM.