Quote:
Originally Posted by reavengeance
did you have to use force to fit the legs in? or did it fit right in without much resistance? I received two PFs in one day, the armored batman and kylo ren, the armored batman was rather difficult and i had to angle it wriggle it before it fit...kylo however seems more fragile and while it did fit it couldn't go down all the way... leaving a gap
|
I remember it was difficult to push the peg into the base, but it is flush.
Measure the peg length and the depth of the peg hole on the base. For the peg base, stick a tooth pic or something down into it and mark the toothpick and compare it with the peg on the statue.
If the hole is not deep enough, see if there is any paint in it, if so, try scratching at it to remove some. My Gambit had some paint residue on the sides of the peg hole and I had to scrape it off before the statue went in.