I'm in the process of adding more shelves to my Detolf cabinets, as i am limited to 2x 1/4 scale statures per cab.
So far i've obtained thicker glass shelves.
Since i am no welder, i have opted to take the U Bolt Clamp route. Having read this guide, the poster mentions using 4x 3/16" wire rope clips per shelf.
http://www.tfw2005.com/boards/thread...helves.423114/
Having obtained the 4x 3/16" wire rope clips (via email) discovered they are too small
Having measured the Detlof vertical metal bars (which i should have done in the 1st place
) they are 6mm. The correct clips are:
6MM Stainless Steel Saddle Clamp Cable Clip
M6 Stainless Steel Saddle Clamp Cable Clip
They don't have to be stainless steel, but they do look better.
Under the corner of each piece of glass is a round stick on pad to cushion any unevenness.
The spare space on the left if for either Catwoman or Captain Marvel, depending on how heavy they are.
Given how heavy Black Widow and Ms Marvel are, I still would not place them on a glass shelf.