Displaying Extra Heads

[Juicemagic]

I have a few extra heads I want to display along side my statues. I remember seeing a tutorial here on making custom stands a long time ago but I cant find it. Does anyone have any ideas or maybe remember the thread that the stand was detailed in?

[SuperJ300]

Good idea, maybe should ask Jerry for stands for our statues. Prime1 studios have good ones for their Transformers line.

[Grayfox117]

I made some years ago. Here's my post. I don't have room to display them anymore.

http://www.statueforum.com/showthrea...fox117&page=57

[Juicemagic]

Originally Posted by Grayfox117

I made some years ago. Here's my post. I don't have room to display them anymore.

http://www.statueforum.com/showthrea...fox117&page=57

thank you kind sir. I am gonna do this for a couple of my statues over christmas.

[DarkMario616]

Seems easy enough. I would buy decals too for the stands: SFIV or Street Fighter.

MK would be a dragon logo.

You know what? Why doesn't the black base for the MK line have a dragon design? Didn't even have to stand out could have been dark gray.

[Grayfox117]

Originally Posted by Juicemagic

thank you kind sir. I am gonna do this for a couple of my statues over christmas.

Your welcome. They are easy to make. The only thing is that each one has to be made for a specific head because the bottom / mating surface of the heads are all different. Some have notches, some have steep angles etc. I bought extra material to make more for future statues back then but once shelf space started going away I had to stop using them (for now).

[Juicemagic]

Originally Posted by Grayfox117

Your welcome. They are easy to make. The only thing is that each one has to be made for a specific head because the bottom / mating surface of the heads are all different. Some have notches, some have steep angles etc. I bought extra material to make more for future statues back then but once shelf space started going away I had to stop using them (for now).

Yeah I figured so especially since the dhalsim head has a large pin I would imaging for this one I would have to drill a corresponding hole in the dowel rather than using a magnet. I will make sure to spraypaint on my balcony to avoid a divorce.

the other two I have are sagat (two extra heads!) and bison (1 extra head) for now, and as you said I'll get stock for a couple more.

[Juicemagic]

Originally Posted by Juicemagic

thank you kind sir. I am gonna do this for a couple of my statues over christmas.

Decals are not a bad idea, but the plain one which Gray made matches the base of the statue, so in this case I think plain is the way to go .

[BornFreeSF]

Originally Posted by Grayfox117

I made some years ago. Here's my post. I don't have room to display them anymore.

http://www.statueforum.com/showthrea...fox117&page=57

Aww. Back in the days when AkumaLove was on the forums.

Sadly your link takes me to the wrong place because I reverse the posts so the newest is first.

[ONEYE]

Use them as Christmas tree ornaments.