How to Clean Attakus Statues

[DeathStar99]

Originally Posted by cap70

and you're welcome, deathstar.
Search on the photo stores, or any other place that sells photo gear or sunglasses. Any good microfiber cloth would work. I already used water on some of my Attakus statues, but always very, very little, just some drops on the cloth. How dirty it is? Try the cloth alone first, without water. I don't like using canned air on statues.

Cap,
I called Attakus america and they said what you said water only is ok if you need to.I went to a local camera store and bought a microfiber cloth and some cotton gloves.They were out of the Camera lense brushes gotta wait for more to come in. Thanks again BTW i just bought a Attakus C-3P0 at a good price from Mike Richards on Ebay.Great seller.Greg

[DeathStar99]

Originally Posted by cap70

Use a quality microfiber cloth to do that and apply just a little pressure until you can't see the finger print anymore

Cap, My local camera store just called me and they got in a good wisk anti-static brush which is used for negatives Ect. It was fairly expensive at $16.00. How do you feel about using this on Attakus statues? No static brush made from special soft natural hair and a conductive fiber. Greg BTW i now have Vader-2, C3PO and R2-D2. I'm on my way.

[cap70]

Deathstar, that will be perfect! And congrats on the new pieces!

[Darth Torment]

I thought this would be an excellent thread to bump.
Prob a great one to sticky as well.

Anyone have any other cleaning tips?

I have a question.

What is the best way to remove existing oils you may have on an Attakus statue. Especially when it is noticeable in a black "cloth" statue?

Thanks