Quote:
Originally Posted by Vendetta
One issue I had was getting her peg into the base. I had to apply a scary amount of pressure to get her mostly in, and even then it isn’t 100% where I want it to be. I know this has been an issue on other statues, and I think in some cases it has gotten better after sitting for a few days, so I’ll just hope it settles in more eventually.
|
Hi, curious to know what happened to the peg foot. Did it go in lower?
After 3 weeks of having this I opened the box the other day and everything came out nicely, except for the peg foot. Like your's mine did not go in all the way, about 3 mm space. The peg hole was nice and tight and was more than deep enough so it must have been the rectangular piece that surrounds the peg. I measured the hole and measured the rectangular peg piece and sure enough, the hole was 1 mm too small on the long sides. There was no way it would settle in in time.
I doubt P1 was going to give me a replacement base and/or statue body, so I used an exacto knife and sliced about 1 mm from the sides of the rectangular hole in the base and viola, nice and snug now.