|
01-30-2016, 05:36 AM
|
#1
|
Doh!
Join Date: Aug 2015
Posts: 5
|
SCULPTING ADVICES - BEGINNER
Hello, i'm new here and i would love to take some advices from you guys. I love to sculpt and make busts of my favourite characters and I have some questions:
1) What do you use for sculpting? I'm using traditional clay and i would like to expand my knowledge about sculpting materials. I saw you guys are using some type of plastilina or polymer clay. What is the difference between all these materials? What are the best reusable materials for sculpting?
2) What do you recommend in making the moulds? What type of silicone?
3) What do you use for casting?
Thanks a lot!
|
|
|
01-31-2016, 07:58 PM
|
#2
|
Shadowhawk
Join Date: Jun 2006
Posts: 918
|
Howdy Conopida!
1. I really enjoy using Super Sculpy Firm. It's the grey colored one. Sometimes I mix it with reg. Super Sculpy. The advantage of SS over traditional clay is that you can bake SS fairly easy in your own oven, and then add to it or modify as needed and continue to sculpt and bake as you go. Very strong and durable. You can file, sand, cut of or add to it very easily.
2 I use Smooth On Moldstar silicone for molds. A very easy 2 part system that works well.
3 Again, Smooth Cast resin (320) is great for casting.
|
|
|
02-06-2016, 06:44 PM
|
#3
|
Doh!
Join Date: Aug 2015
Posts: 5
|
Thanks! But is there any material that you can make a mould from, but without baking it? Just let it harden and make a mould.
|
|
|
02-07-2016, 05:23 PM
|
#4
|
Before you criticize someone, you should walk a mile in their shoes. That way, when you criticize them, you're a mile away and you have their shoes.
Join Date: Apr 2007
Location: UK
Posts: 601
|
There are air hardening clays, but they usually aren't very good for detailed work.
|
|
|
02-08-2016, 01:55 PM
|
#5
|
Doh!
Join Date: Aug 2015
Posts: 5
|
OK, so if i use sculpey i must complete the sculpture in a limited time so the clay doesn't get hard?
|
|
|
03-21-2016, 10:18 PM
|
#6
|
Frackin!
Join Date: Mar 2015
Location: St.Louis, MO
Posts: 41
|
Super Sculpy won't harden up that I know of until you bake it. I'll take a week or so off leaving it uncovered then go back and start up again.
|
|
|
03-23-2016, 01:00 AM
|
#7
|
Sey hallo to my lille fren!
Join Date: Nov 2009
Posts: 133
|
I like using Chavant's Y2Klay.
It never hardens but is so firm when you stop working it that it can be milled, drilled and polished. I use a juice glass on a cheap mug/candle warmer to soften it up.
It is not cheap but is 100% reusable.
It accepts very fine detail.
|
|
|
10-03-2016, 07:41 AM
|
#8
|
Doh!
Join Date: Sep 2016
Posts: 4
|
I use plastilina for sculptures, followed by a cheap silicone mold and casting in plaster, plastic or resin.
The mold I use is made from silicone caulk, found at any home depot store. It's not super cheap as I use 3-4 tubes per sculpt, but it's far cheaper than traditional silicone molds. It's a lot of extra steps versus oven baked clays, but I'm not a fan of sculpy, myself, and prefer to use and reuse the giant bucket of plastilina I've amassed over the years.
|
|
|
10-03-2016, 08:36 PM
|
#9
|
Frackin!
Join Date: Oct 2009
Location: Northern Ireland
Posts: 38
|
Quote:
Originally Posted by conopida
Thanks! But is there any material that you can make a mould from, but without baking it? Just let it harden and make a mould.
|
Two-part epoxy putty. Stuff like Magic Sculp, Aves Apoxie Sculpt, Milliput, Kneadatite blue/yellow, and more. Mix the two parts to a uniform colour and you have about 1-3 hours before it becomes too stiff to work, a few more hours for full hardness. Needs a slightly different process and attitude to clay sculpting, building in layers and parts from core to details. With the cost of the stuff, it may be better suited to fairly small scale sculptures too.
|
|
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
|
All times are GMT -4. The time now is 04:47 AM.