Statue Forum 





Go Back   Statue Forum > Statue Talk - Others > Leave it to the Professionals Please > William Paquet

Reply
 
Thread Tools
Old 08-09-2006, 05:03 PM   #1
William Paquet
Sculptor
Sculptor
 
William Paquet's Avatar
 
Join Date: Feb 2006
Location: Insmouth
Posts: 1,911
Baking Super Sculpey to achieve proper hardness

To start, you should ignore the directions as written on the package. You can get the clay to harden by baking for fifteen minutes per ¼ inch thickness, but it won’t be properly hardened.

Going under the assumption that what you will be baking is a full finished figure, anywhere from 6 to 15 inches tall, requires far more time in the oven than most people would assume.

I always bake the finished work for several hours. If the sculpt has some very thick areas that haven't been beefed up with foil or previously baked blocks of clay even longer.

This works for me-

225 degrees for three hours, turn the oven down to the minimum- 170 degrees on most ovens, bake for another three hours, shut the oven off and leave the sculpt to cool overnight.

You want a higher temp for initial baking to properly cure the clay, and you want the reduced temp over an extended period to allow the core of the mass to gradually cool which reduces the chance of cracking.

A poorly baked sculpt will be weak and prone to breaking and chipping. Sometimes when I bake in stages areas of the sculpt will get very dark. The darker the clay, the harder it is.

Here's a sample-



Notice the head color. It may not look like it if you've never baked a long time, but that's the same sculpey as the rest of the figure. When it get's to that color the material is very strong and will take quite a bit of abuse before damage can occur.

With the new Grey Sculpey firm, the changes in the color of the clay are more subtle, but it will still change. The same baking techniques still apply.

Also, the clay when hot or warm is always "rubbery". In fact heat is a great asset when cutting a sculpt into separate components. When I need to remove arms, like on this piece, I use a heat gun to warm the areas. The sculpey softens, and I use an exacto to make the cuts. If you've assembled a vinyl garage kit, the technique is similar to heating vinyl before cutting the parts. In the future I will try and find the time to post a thread just on separating and keying a figure.
William Paquet is offline   Reply With Quote
Old 08-12-2006, 01:42 PM   #2
William Paquet
Sculptor
Sculptor
 
William Paquet's Avatar
 
Join Date: Feb 2006
Location: Insmouth
Posts: 1,911
Quote:
Originally Posted by Veritas
Great info

So is it ok to bake parts separately, then attach them and bake the entire thing again?

For example bake a finished head, attach it modify it as necessary and then bake the entire figure ?

Thanks for the help
Yes. Heads, hands, whatever. If you want to make them separate from the figure go right ahead. Bake them, attach them to the figure, sculpt some more, bake again. No problem.
William Paquet is offline   Reply With Quote
Old 08-13-2006, 01:49 PM   #3
William Paquet
Sculptor
Sculptor
 
William Paquet's Avatar
 
Join Date: Feb 2006
Location: Insmouth
Posts: 1,911
You need to assemble the parts as you would a kit. Use a peg of some kind, and either super glue or epoxy it. Then you can modify the work, re bake, etc.
William Paquet is offline   Reply With Quote
Old 08-17-2006, 04:28 PM   #4
William Paquet
Sculptor
Sculptor
 
William Paquet's Avatar
 
Join Date: Feb 2006
Location: Insmouth
Posts: 1,911
Quote:
Originally Posted by Bengalslair
William...excellent reference...I have a question though. Does this also apply to sculpy mixtures/Grey sculpy?

-Husky
Any polymer clay will work the same way.
William Paquet is offline   Reply With Quote
Old 03-26-2008, 10:47 AM   #5
Kdawg59
Sculptor of Gods
ProducerSculptor
 
Kdawg59's Avatar
 
Join Date: Aug 2004
Location: Ann Arbor, Mich
Posts: 4,807
I've copied this here from the "sculptor's pit stop" so you can all reference this GREAT source of info from the man himself.
__________________
--
Keith
Kdawg59 is offline   Reply With Quote
Old 03-27-2008, 01:06 PM   #6
hellspawn77
Sculptor
Sculptor
 
hellspawn77's Avatar
 
Join Date: Aug 2004
Location: Toronto, Canada! Eh?
Posts: 662
... you had me at "...to achieve proper hardness"

Claudio
hellspawn77 is offline   Reply With Quote
Old 03-27-2008, 01:18 PM   #7
William Paquet
Sculptor
Sculptor
 
William Paquet's Avatar
 
Join Date: Feb 2006
Location: Insmouth
Posts: 1,911
Quote:
Originally Posted by hellspawn77 View Post
... you had me at "...to achieve proper hardness"

Claudio
what would your mother say?
__________________
www.quarantinestudio.com
William Paquet is offline   Reply With Quote
Old 03-27-2008, 01:35 PM   #8
hellspawn77
Sculptor
Sculptor
 
hellspawn77's Avatar
 
Join Date: Aug 2004
Location: Toronto, Canada! Eh?
Posts: 662
Quote:
Originally Posted by William Paquet View Post
what would your mother say?


BTW- that is an awesome Cap in the pic!

Claudio
hellspawn77 is offline   Reply With Quote
Old 04-15-2008, 08:33 PM   #9
shiflettbrothers
Sculptor
Sculptor
 
shiflettbrothers's Avatar
 
Join Date: Aug 2004
Location: Houston
Posts: 1,024
if I get it too baked sometimes it won't even achieve proper hardness, and I'm only 35.


j
shiflettbrothers is offline   Reply With Quote
Old 04-15-2008, 09:29 PM   #10
Vader
Ghost
 
Join Date: Mar 2005
Posts: 8,688
This is like a cooking course. Apart from Jarod's perverted comment.
Vader is offline   Reply With Quote
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Powered by vBadvanced CMPS

All times are GMT -4. The time now is 09:54 AM.



Powered by vBulletin®
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright StatueForum.com