Display shelf for PFs

[SONICobra]

right but the frosted glass could be replaced. the thing I was wondering about if anybody had them were the horizontal inserts. I watched a video of one being constructed and they are separate from the outer frame, so I was wondering if they would be easy to put where you wanted instead of where theyre supposed to go (4 equally spaced per door)

[Lawnknome]

Originally Posted by SONICobra

you can mount a small piece of wood level to the pegs on the sides of the cabinet for additional support and mount metal braces to the underside of the shelf - that should help

Could you maybe explain this like I'm inept? For some reason it's not clicking.

[pavehawk78]

Originally Posted by SONICobra

right but the frosted glass could be replaced. the thing I was wondering about if anybody had them were the horizontal inserts. I watched a video of one being constructed and they are separate from the outer frame, so I was wondering if they would be easy to put where you wanted instead of where theyre supposed to go (4 equally spaced per door)

The frames are predrilled for the horizontal inserts. But you can leave out the inserts all together and use one solid plexiglass sheet.

[SONICobra]

Originally Posted by Lawnknome

Could you maybe explain this like I'm inept? For some reason it's not clicking.

-you know where the pegs insert into the sides of the frame? (where the shelf sits on)
-between the pegs you can mount an additional piece of wood so that the shelf itself is not just resting on the pegs but also this for additional support
-if you mount a piece of formed metal (not flat) to the underside of the shelf it will help prevent the shelf from bowing (to a certain point, it would be better if you could find a way to attach it to both the shelf and the sides of the cabinet)
-hope that helps that's about the best I can do without pictures and I don't have any of these cabinets yet

Originally Posted by pavehawk78

The frames are predrilled for the horizontal inserts. But you can leave out the inserts all together and use one solid plexiglass sheet.

right on, thanks bro do you have this set up or have you seen it done? im wondering how stable / secure the plexiglass would be without the inserts...?

[Lugosival]

My Cinema premium formats ,,,

[CommanderZx2]

Originally Posted by Lugosival

My Cinema premium formats ,,,

Great setup, by the way how did you get additional shelves in your DETOLF to the right?

[Whirl Wind Boy]

Originally Posted by Lawnknome

Could you maybe explain this like I'm inept? For some reason it's not clicking.

Go to a hardware store and ask for some L brackets. They'll come with screws as well. Drill those under your shelf along all 3 sides of your cabinet for additional support!

[Lugosival]

Originally Posted by CommanderZx2

Great setup, by the way how did you get additional shelves in your DETOLF to the right?

methacrylate bases are tailored

[Webb]

Originally Posted by Lugosival

My Cinema premium formats ,,,

You keep all that stuff in front of your computer screen ?

[SideShowJoe]

Originally Posted by Webb

You keep all that stuff in front of your computer screen ?

Only one thing is really covering screen, if he would put really any more on desk it would look cluttered but as it is right now... i like the set up!

Sarah