Quote:
Originally Posted by Lavario007
This is a great statue. Beautifully painted and almost flawless. After taking the photos(Galaxy S7 Edge ) I went to remove the body from the base and the peg on the left foot detached and got stuck In the peg hole. After an hour of trying to remove the lodged peg I decided to drill a hole the same size as the peg underneath the base and forced It out
|
I was having trouble assembling mine as the pins would only just about go in the holes but would not go all the way down. When checking the left foot pin to its hole (not offering the right pin to its hole) I found the hole very tight. Rather than forcing the piece together I found the pins only 0.007 inch under 1/8 inch as I had an 1/8 drill, I just by hand turned it round in the hole. And now fits together without forcing and yet a good fit.
Hope this helps other before they assemble if there finding theirs tight.
I did find the base was also not totally flat and has a slight wobble on its 4 rubber feet.
Apart from them problems, a very nice piece.