Quote:
Originally Posted by DiscoCougar
That thread has a lot of broken picture links and a lot of older info =)
From what I can see with your current pic, it looks like you have sliding doors on them. But trying to go through the older Freaks posts, someone's saying that the sliding doors need non-Ikea parts to install them? But then another post makes it sound like you can buy Ikea sliding doors?? What's your current build all got?
|
You can get everything in white as well, but I went with black so here is everything I used.
I used these frames (I couldn't use the tallest ones because my basement ceilings aren't high enough):
https://www.ikea.com/us/en/p/pax-2-w...own-s69895247/
These are the shelves for the PAX:
https://www.ikea.com/us/en/p/komplem...rown-80277971/
I then bought these to put under the shelves for reinforcement and to prevent bowing (you can spray paint them black to blend in better):
https://www.ikea.com/us/en/p/komplem...gray-30256966/
These are the lights:
https://www.ikea.com/us/en/p/norrfly...olor-80332307/
You will need other components to hook the lights up that are sold on the site as well. It depends on whether you want remote control or to turn them on manually. Just scroll down and read what other components are needed.
These are the sliding door frames I bought. You just don't use the middle brackets:
https://www.ikea.com/us/en/p/pax-pai...lack-40250271/
Then I had acrylic sheets cut to put inside the frames. The exact measurements for mine were: 39.625 inches wide X 77 inches tall X 0.187 inches thick (go with 0.062 tolerance which is standard)
You can order the acrylic sheets here if you don't have a local place in town, but any cabinet or glass place should be able to do them for you:
https://www.professionalplastics.com...SHEET-EXTRUDED