Statue Forum 





Go Back   Statue Forum > Statue Talk - Others > Bowen Designs

Reply
 
Thread Tools
Old 04-19-2024, 10:19 AM   #1
Madplanet
Doh!
 
Join Date: Apr 2024
Posts: 2
Spider-man Wall Sculpture (Creative License) Bowen touch up

Hi! I?m very new to the forum. I used to be a big statue collector and had some great stuff from the earlier times of statue collecting. I just recently rebought the Spider-Man wall sculpture by Randy Bowen. I noticed on Spidey?s back there are some small spots the painter missed. I was wondering if anyone has any suggestions as to what kind of paint I can use to touch them up. Or maybe if someone knows what was originally used that would be great! To me even after all the years of what?s come since and despite it being a wall hang this piece is still the definitive Spider-Man Statue! Thanks for your time!
Attached Thumbnails
Click image for larger version

Name:	IMG_0192.jpg
Views:	56
Size:	351.8 KB
ID:	169870  
Madplanet is offline   Reply With Quote
Old 04-22-2024, 07:32 PM   #2
The SHOGUN
Hellfire Club
 
The SHOGUN's Avatar
 
Join Date: Feb 2011
Location: Harlem
Posts: 4,130
Welcome to Statue Forum.

Take a trip to Michael?s go to the paint section and they will be an isle full of 1 oz paint bottles. Super cheap from .99 and up. If you are looking to paint blue get multiple blue bottles of paint closest to the shade u need. if need red get multiple red. Chances you will get a perfect match right off the shelf is slim but it does happen if you select wisely. Take a cell phone pic of the back of the statue with the missing paint. Make sure it?s in natural lighting. When selecting the paint a couple matches will be blatantly obvious at first glance but it?s best to screw open the tops and see what the actual color looks like inside the bottle. You may have to mix two colors to get a good match. Overall this is like $4-5 of paint tops. If mixing paint get a paper plate, squirt a small dime sized sample of your mixing colors. Grab a tiny bit from each and mix it together in a separate area on your plate. Less is more. You should get your perfect mixture this way ?or at least close to it.

You will need a set of paint brushes. They have a nice of brushes in a bag on the end caps for like $4.99. You will also need to buy sealer. I recommend ModPodge. Matte should work just fine. If you Paint straight of the bottle on a sealed statue and let it dry the paint touch up job will look very dull and blatantly obvious it was a touch up. After touch up paint is applied? let it dry and then get a small amount of ModPodge Matte and coat it over the dull newly dried acrylic paint. When this dries it should be a pretty close match to the original finish. THIN COATS for paint and modpodge. If it?s a glossier finish you may want to opt for the ModPodge Satin instead of matte, but matte should do it.

I hope this helps.
The SHOGUN is offline   Reply With Quote
Old 04-24-2024, 09:19 AM   #3
Madplanet
Doh!
 
Join Date: Apr 2024
Posts: 2
Very much so! Thank you, sir. I?m fortunate that I have two of these Spidey wall hangs (one of which is a repair job) so I have one to practice one. If I get good at this I thought of eventually trying to paint the repaired on in the black costume. Thanks again!
Madplanet is offline   Reply With Quote
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Powered by vBadvanced CMPS

All times are GMT -4. The time now is 05:56 PM.



Powered by vBulletin®
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright StatueForum.com