Iron Studios Captain America - Endgame: 1:4 Scale Statue

[Y3E]

Originally Posted by dw316

Are the shields on all the Iron Studios Captain America statues made of the same material?

Feels like it. Plastic I think. Mjolnir too

[Drum18]

Originally Posted by moonlightdrive21

Thanks. Can you share the Facebook link to this post? Tks.

Here:
https://www.facebook.com/groups/stat...2029313566263/

[Y3E]

Does anyone have an issue with the full shield arm not sitting into the key hole completely? Mine is angle too much towards the delt so the shield rub against it. It looks like it's all the way in but from the lack of strength in the magnets I can tell it is not. Feels like it will fall off.

[Phoenixblazes]

Originally Posted by Y3E

Does anyone have an issue with the full shield arm not sitting into the key hole completely? Mine is angle too much towards the delt so the shield rub against it. It looks like it's all the way in but from the lack of strength in the magnets I can tell it is not. Feels like it will fall off.

I wouldn’t be so sure about that as every second person on the two forums and on YouTube have been saying that the magnets are awfully weak. Though out of them all, the shield arm is usually the strongest.

[Y3E]

Originally Posted by Phoenixblazes

I wouldn’t be so sure about that as every second person on the two forums and on YouTube have been saying that the magnets are awfully weak. Though out of them all, the shield arm is usually the strongest.

The broken shield arm magnets are strong. I have to pull hard to get it off. The full shield arm has very little resistence.

sorry for the sideway picture. Where is your shield's edge situated in relation to the stripe on the delt? Thanks.

[moonlightdrive21]

Originally Posted by Drum18

Here:
https://www.facebook.com/groups/stat...2029313566263/

Thanks Drum !

[tarim69]

Overall a great piece but not without a few WTF issues.
The seam in the hair of the helmetless portrait ( I'm not displaying it like that but still...) Unacceptable imho.

Mjolnir. I was afraid of breaking the thing putting it together. Its plastic. I understand this from a weight/magnet issue, but it really is flimsy.

Finally, the base has a possible forward leaning issue. This thing tilts forward very easily. Another base tab would have been ideal. I'll prob put some kind of leveling sticker under it for insurance
(edit: 3 TINY #10 washers wrapped in black tape under the front did the trick)

Also as F3E mentioned, its seems like the full shield does slightly rub on the shoulder.
BTW, The non helmet portrait looks MUCH better in person. Great job.

[Phoenixblazes]

Originally Posted by tarim69

Overall a great piece but not without a few WTF issues.
The seam in the hair of the helmetless portrait ( I'm not displaying it like that but still...) Unacceptable imho.

Mjolnir. I was afraid of breaking the thing putting it together. Its plastic. I understand this from a weight/magnet issue, but it really is flimsy.

Finally, the base has a possible forward leaning issue. This thing tilts forward very easily. Another base tab would have been ideal. I'll prob put some kind of leveling sticker under it for insurance
(edit: 3 TINY #10 washers wrapped in black tape under the front did the trick)

Also as F3E mentioned, its seems like the full shield does slightly rub on the shoulder.
BTW, The non helmet portrait looks MUCH better in person. Great job.

Regarding your last photo:- And all your dog is thinking.....why is daddy taking photos of his toys again instead of playing catch with me.

[jeremydmc]

That's a handsome GSD!!!

[tarim69]

They got to chase the frisby earlier.

And tnx ! They're spoiled rotten, but incredibly smart.


Dax doesnt seem to like Cap.