|
|
|
|
|
|
01-13-2021, 01:54 AM
|
#241
|
Hydra
Join Date: Dec 2020
Posts: 997
|
Can't wait for you guys to receive this. I think this piece has converted me to a genisys endo fan. Absolutely nothing on the market comes close to this, it's the ultimate terminator piece.
|
|
|
01-13-2021, 02:10 AM
|
#242
|
The Spirit
Join Date: Nov 2009
Posts: 340
|
Quote:
Originally Posted by Dundee
Can't wait for you guys to receive this. I think this piece has converted me to a genisys endo fan. Absolutely nothing on the market comes close to this, it's the ultimate terminator piece.
|
agreed mate, it looks to blow the sideshow one out of the water as the quality of the sideshow one version 2 is quite poor. the chrome is cracking on mine as it is on another one i know of. so thats two for starters, so lets hope this one is an improvement and is much better on display over the long term.
|
|
|
01-13-2021, 04:07 AM
|
#243
|
Hydra
Join Date: Dec 2020
Posts: 997
|
Quote:
Originally Posted by wayne-m0
agreed mate, it looks to blow the sideshow one out of the water as the quality of the sideshow one version 2 is quite poor. the chrome is cracking on mine as it is on another one i know of. so thats two for starters, so lets hope this one is an improvement and is much better on display over the long term.
|
Absolutely, in terms of accuracy and asthetics it's in a league of it's own. Correct me if I'm wrong but wasn't Sideshow version 2 painted? So maybe it's the paint cracking and wearing off overtime?
|
|
|
01-13-2021, 02:48 PM
|
#244
|
The Spirit
Join Date: Nov 2009
Posts: 340
|
Quote:
Originally Posted by Dundee
Absolutely, in terms of accuracy and asthetics it's in a league of it's own. Correct me if I'm wrong but wasn't Sideshow version 2 painted? So maybe it's the paint cracking and wearing off overtime?
|
no mate just take a look at this crap which they produce!!!!!! Its everwhere not even a year old like a disease serious QUALITY CONTROL PROBLEM and not fit for purpose.
|
|
|
01-13-2021, 02:54 PM
|
#245
|
The Spirit
Join Date: Nov 2009
Posts: 340
|
and the best about it was Sideshow thinks this is acceptable for one year on display and had the gaul to say it was an unpacking and assembly problem. So complained to sideshow to get a replacement. This is not a high end display piece worth 6 grand let alone 600 at this rate. No response as yet. Give me my money back sideshow or replace the whole damn thing. Your production of this is flawed. Its not just mine another contact i know his not even 4 month old and going the same way. THIS IS A CHROME PLATING ISSUE AT MANUFACTURE ITS NOT ADHERING TO THE BASE MATERIAL.
|
|
|
01-13-2021, 03:41 PM
|
#246
|
Hydra
Join Date: Dec 2020
Posts: 997
|
Quote:
Originally Posted by wayne-m0
and the best about it was Sideshow thinks this is acceptable for one year on display and had the gaul to say it was an unpacking and assembly problem. So complained to sideshow to get a replacement. This is not a high end display piece worth 6 grand let alone 600 at this rate. No response as yet. Give me my money back sideshow or replace the whole damn thing. Your production of this is flawed. Its not just mine another contact i know his not even 4 month old and going the same way. THIS IS A CHROME PLATING ISSUE AT MANUFACTURE ITS NOT ADHERING TO THE BASE MATERIAL.
|
That is absolutely unacceptable, even by third world standards. From those pics the entire statue is defective, it looks to me they botched up every step of the chroming process. Those pics show it's clearly a manufacturing problem, it looks diseased as its evenly cracking, not an inch missed. I'm stunned they mention it being unpacking and assembly problem. I'd keep at it and if able to, mention it to a consumer protection agency and see if they are able to force mediation. This is a nightmare to see a piece at that price point like that and sideshow wanting to brush off and not take responsibility. Thanks for calling this out, I never buy stuff from sideshow, what a circus company they have become. Hope you get an entire refund asap, in fact that should be at least the minimum, with all the time and energy sapped from chasing this up.
|
|
|
01-13-2021, 06:51 PM
|
#247
|
Alpha Flight
Join Date: Jul 2015
Posts: 4,505
|
Quote:
Originally Posted by wayne-m0
and the best about it was Sideshow thinks this is acceptable for one year on display and had the gaul to say it was an unpacking and assembly problem. So complained to sideshow to get a replacement. This is not a high end display piece worth 6 grand let alone 600 at this rate. No response as yet. Give me my money back sideshow or replace the whole damn thing. Your production of this is flawed. Its not just mine another contact i know his not even 4 month old and going the same way. THIS IS A CHROME PLATING ISSUE AT MANUFACTURE ITS NOT ADHERING TO THE BASE MATERIAL.
|
I know that V2 Endo had leaning issues stemming from bad resin. It looks like yours may have been them trying to experiment with a different resin and it not reacting well to the chrome. So sorry to see yours like that, I would not be happy even if that was ho it looked at 20 years old, never mind only 1, it should never look like that. My old original Sideshow V1 from 15 years ago looks new, it's a shame Sideshow continues to plummet in quality.
|
|
|
01-14-2021, 03:13 AM
|
#248
|
The Spirit
Join Date: Nov 2009
Posts: 340
|
Quote:
Originally Posted by Dundee
That is absolutely unacceptable, even by third world standards. From those pics the entire statue is defective, it looks to me they botched up every step of the chroming process. Those pics show it's clearly a manufacturing problem, it looks diseased as its evenly cracking, not an inch missed. I'm stunned they mention it being unpacking and assembly problem. I'd keep at it and if able to, mention it to a consumer protection agency and see if they are able to force mediation. This is a nightmare to see a piece at that price point like that and sideshow wanting to brush off and not take responsibility. Thanks for calling this out, I never buy stuff from sideshow, what a circus company they have become. Hope you get an entire refund asap, in fact that should be at least the minimum, with all the time and energy sapped from chasing this up.
|
Thanks for the kind words and encouragement mate. As i am in the UK I dont think Sideshow give a damn. To cuff me off saying almost to the point of saying this is wear and tear and acceptable after a year is shocking. For such a high end expensive piece its disgusting and they cant even admit its a chrome issue. one must be blind to not see it.
|
|
|
01-14-2021, 03:16 AM
|
#249
|
The Spirit
Join Date: Nov 2009
Posts: 340
|
Quote:
Originally Posted by 67L88Stingray
I know that V2 Endo had leaning issues stemming from bad resin. It looks like yours may have been them trying to experiment with a different resin and it not reacting well to the chrome. So sorry to see yours like that, I would not be happy even if that was ho it looked at 20 years old, never mind only 1, it should never look like that. My old original Sideshow V1 from 15 years ago looks new, it's a shame Sideshow continues to plummet in quality.
|
thanks mate, yes its terrible. If this shames sideshow and prevents others from having the same hassles as me then it serves a purpose. i have no where to go with this model sadly, took me ages to pay for it and its no small change and wanted one for years. I really feel let down by Sideshow and will never buy anything from them again but just hope Cinemaquette is far better in quality and lasts otherwise ill be jinxed i reckon with terrible luck.
|
|
|
01-14-2021, 07:40 AM
|
#250
|
Hydra
Join Date: Dec 2020
Posts: 997
|
Quote:
Originally Posted by wayne-m0
thanks mate, yes its terrible. If this shames sideshow and prevents others from having the same hassles as me then it serves a purpose. i have no where to go with this model sadly, took me ages to pay for it and its no small change and wanted one for years. I really feel let down by Sideshow and will never buy anything from them again but just hope Cinemaquette is far better in quality and lasts otherwise ill be jinxed i reckon with terrible luck.
|
The law of averages is on your side mate, hoping it all turns out fabulous. On a good note, even the rough snaps taken from recent collectors in asia who have received this...quality looks superlative. It literally looks like real metal alloy and is super smooth on the surface. I dig the pose, has a neat cool looking base with crushed drone and a cpu chip debris which is a nice touch. No guns which I prefer, can see the full endo in it's glory. If I had the space and misses approval, I would buy this though being in Australia I think it wasn't released here. This is going to be virtually impossible to buy in the second hand market, given the tiny ES, the competition would be enormous if one were to be listed.
|
|
|
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
|
All times are GMT -4. The time now is 11:51 PM.
|