FANTASY CREATURES / Various studios

[dao2]

Ghostblade finally went up for PO and sold out quite quick on the ships I normally use. While interested I didn't go for it as it was rather expensive (around $1,100). I didn't see a scale listed but it's about 35 inches tall/wide so I'm sticking with 1/4th scale.

[French Cancan]

Originally Posted by dao2

Ghostblade finally went up for PO and sold out quite quick on the ships I normally use. While interested I didn't go for it as it was rather expensive (around $1,100). I didn't see a scale listed but it's about 35 inches tall/wide so I'm sticking with 1/4th scale.

It was fast , at least on FNC. It wasn't listed this morning, when I checked, but was sold out five hours later...
I won't be surprised if it's listed again on FNC.

EIN STUDIO & WLOP / THE HELL






Resin
-The switch of the light in the body of the Ghos Blade is on the floor. Touch it to light up
- Ghost Blade weapon is made of alloy
Size:H:85cm W:87.3m D:46.1cm ( 33,46 X 34,37 X 18,1 in )
1115 $ at FNC. 1277$ at FigureAce
ES 399

[SDguy]

Originally Posted by French Cancan

It was fast , at least on FNC. It wasn't listed this morning, when I checked, but was sold out five hours later...
I won't be surprised if it's listed again on FNC.

EIN STUDIO & WLOP / THE HELL



Resin
-The switch of the light in the body of the Ghos Blade is on the floor. Touch it to light up
- Ghost Blade weapon is made of alloy
Size:H:85cm W:87.3m D:46.1cm ( 33,46 X 34,37 X 18,1 in )
1115 $ at FNC. 1277$ at FigureAce
ES 399

I love this piece! I know some of us were going back and forth on scale for this one. 85 cm is actually 39" (not 33) so I'm sticking with at least 1/3.

[dao2]

Originally Posted by SDguy

I love this piece! I know some of us were going back and forth on scale for this one. 85 cm is actually 39" (not 33) so I'm sticking with at least 1/3.

85cm is 33.4646 inches according to two different calculators I used....

Originally Posted by French Cancan

It was fast , at least on FNC. It wasn't listed this morning, when I checked, but was sold out five hours later...
I won't be surprised if it's listed again on FNC.

I would be a little surprised tbh, this isn't going to be like pps tifa.

[French Cancan]

Originally Posted by dao2

I would be a little surprised tbh, this isn't going to be like pps tifa.

Don't try to kill my hope!

And I confirm, 85cm is 33,46 in.

[dao2]

Originally Posted by French Cancan

Don't try to kill my hope!

And I confirm, 85cm is 33,46 in.

If it came back up would you buy it? :P

[French Cancan]

At this moment, I am 50/50... Ok, nowadays, more than 1K seems to be the new norm for a 1/4 with an elaborated base, but that new norm can be hard to swallow sometimes... And yes, there are two characters too...

[SDguy]

Yeah my bad I typo'ed the 85 cm in the calculator. Regardless, he's still BIG, bigger than 1/4 I think.

[dao2]

Originally Posted by French Cancan

At this moment, I am 50/50... Ok, nowadays, more than 1K seems to be the new norm for a 1/4 with an elaborated base, but that new norm can be hard to swallow sometimes... And yes, there are two characters too...

Yeah but that price for something without a license is a bit high, and prob 500 in shipping :| And those sorts usually pack and engineer very well. Lots of the breakable stuff seperate, but I don't see how it's going to be that easy to do that with this base so I fear breakage, and replacements on something like this isn't going to happen :P

Originally Posted by SDguy

Yeah my bad I typo'ed the 85 cm in the calculator. Regardless, he's still BIG, bigger than 1/4 I think.

maybe but 34 inches with the base and how big he is I don't think he is much bigger if at all. I based my original 1/4th guess based on the picture of the girls head in the persons hand as she is likely a more normal human size. And that head was wayyy to small to be 1/3d.

[SDguy]

It's a moot point I suppose since they are both fanciful figures that can be any IRL size we want them to be